An angle specified

An angle specified by the rotation of the shaft and a selected plane at an angle to the reference plane. Bisecting plane Select two parallel planes, they are equidistant from UG NX the center of creation and the reference plane. Curves and points through a specified point, and to determine the reference level by selecting the condition of another Normal surfaces. Two straight lines by selecting two straight lines define a reference plane. Tangent plane tangent to the selected surfaces and subject to UG NX another selected object. Object plane is created automatically based on the selected reference plane object. Main plane or utilization factor fixed reference plane is determined to create a work coordinate system reference plane. 2.-based Quasi-axis (Datum Axis) in a straight line with an arrow indicates, as shown in Figure 3.33. The main application is the reference axis as the FaroArm direction of reference and the rotation axis. 3 base Quasi-coordinate system (Datum Csys) a reference coordinate system contains three reference plane, three reference axis, an origin and a CSYS, as shown in Figure 3.34. General Proposal to create the absolute coordinate system (Acs) reference coordinate system started in modeling, modeling of the reference position as a reference.